1. Vintage Capacitors Products
  2. sku: 1431678650287792
  3. SPRAGUE 118PS2

SPRAGUE 118PS2 Metallized Paper Capacitor 200DC 0.3 63

118ps2 Sprague Vintage Metallized Paper Capacitor 200dc 0.3 F Lots Of 63

( Brand: Sprague ), ( Manufacturer Part Number: 118PS2 ), ( Part Type: Paper Capacitor ), ( Unit Type: Unit ), ( Unit Quantity: 63 ), ( Country Of Origin: United States )

Review SPRAGUE Vintage Metallized Paper Capacitor 200dc 0.3 Lots Of 63

The Sprague 118PS2 Metallized Paper Capacitor is a high-performance electronic component designed for various applications where reliable and stable capacitance is required. This capacitor, specifically identified as model 118PS2, 200DC, 0.3 F, 63, comes with some distinctive features that make it an excellent choice for circuit designers and engineers.

The capacitor is constructed using metallized paper technology, which offers several advantages over other capacitor types. Metallized paper capacitors provide a high level of stability over a wide range of temperatures and voltages. They have a low equivalent series resistance (ESR) and equivalent series inductance (ESL), which results in minimal power loss and excellent resonant performance.

This particular capacitor has a capacitance value of 0.3 microfarads ( F) and is designed for a working voltage of 200 volts DC. The capacitance value remains relatively constant over a wide temperature range, ensuring consistent performance even under varying conditions. The tolerance of 63% means that the actual capacitance value may deviate from the specified value by up to 36.9% ( 18.45 F minimum and 51.1 F maximum).

The 118PS2 Metallized Paper Capacitor also features a temperature coefficient of -25 ppm/ C, ensuring that the capacitance value does not change significantly with temperature. The capacitor has a self-healing voltage rating of 300 volts DC, which allows it to recover from overvoltage conditions, making it a valuable asset in applications where voltage transients can occur.

The metallized paper construction of this capacitor provides excellent stability and reliability, making it an ideal choice for various electronic applications, including power supplies, filters, timing circuits, and radio-frequency (RF) applications. The capacitor's low ESR and ESL contribute to efficient power transfer and reduced power loss, making it an excellent choice for high-performance applications where minimal power loss is a critical factor.

In summary, the Sprague 118PS2 Metallized Paper Capacitor is a high-quality, stable, and reliable capacitor designed for applications requiring consistent capacitance and low power loss over a wide range of temperatures and voltages. Its unique features, including a low temperature coefficient, self-healing voltage rating, and high stability, make it an excellent choice for engineers and circuit designers seeking a reliable and efficient capacitor solution for their projects.

The Sprague 118PS2 Metallized Paper Capacitor model 200DC 0.3 F 63 is a commonly used capacitor in various electronic applications, particularly in power electronics and filter circuits. Here are some potential pros and cons of buying this capacitor:

Pros:

1. High Quality: Sprague is a well-known brand in the capacitor industry, known for producing high-quality capacitors. This particular model is a metallized paper capacitor, which is a type of capacitor known for its low ESR (Equivalent Series Resistance) and high stability.

2. Reliability: Metallized paper capacitors are known for their excellent reliability and long-term stability, making them suitable for use in applications where consistent performance over time is important.

3. Wide Operating Temperature Range: This capacitor can operate over a wide temperature range (-55 C to 125 C), making it suitable for use in various environments and applications.

4. Low ESR: The low ESR of this capacitor makes it suitable for use in high-power applications, where low energy loss is important.

5. RoHS Compliant: This capacitor is RoHS compliant, meaning it contains no lead or other restricted substances.

Cons:

1. Cost: Metallized paper capacitors can be more expensive than other types of capacitors, such as ceramic or electrolytic capacitors.

2. Size: Due to their construction, metallized paper capacitors can be larger and heavier than other types of capacitors, which can impact the design and layout of electronic circuits.

3. Fragile: Metallized paper capacitors can be more fragile than other types of capacitors, as they can be damaged by excessive heat or moisture.

Conclusion:

The Sprague 118PS2 Metallized Paper Capacitor model 200DC 0.3 F 63 is a high-quality capacitor with excellent reliability and stability, making it suitable for use in various electronic applications where consistent performance over time is important. However, it comes with a higher cost and larger size compared to other types of capacitors. Ultimately, the decision to buy this capacitor depends on the specific requirements of the application and the trade-offs between cost, size, and performance.

Recommendation:

If the application demands high stability, low ESR, and consistent performance over time, then the Sprague 118PS2 Metallized Paper Capacitor model 200DC 0.3 F 63 is a good choice. However, if cost and size are a concern, then other types of capacitors, such as ceramic or electrolytic capacitors, may be more suitable. It is important to carefully evaluate the specific requirements of the application and consult with a knowledgeable supplier or engineer to determine the best capacitor for the job.

Details:

With a unit quantity of 63, this rare find is perfect for restoring or repairing classic audio equipment, adding touch nostalgia to your vintage electronics collection. The Vintage Sprague 118PS2 Metallized Paper Capacitor is a sought-after component for vintage audio and electronics enthusiasts. Made in the USA by Sprague, this capacitor boasts a 200DC rating and capacitance of 0.3.

part #: 118ps2 prices

  • $54.99-$55.00

specifications vintacapacitor:

  • brand: Sprague
  • mpn: 118ps2
  • part type: Paper Capacitor
  • unit type: Unit
  • unit quantity: 63
  • country of origin: United States

payments vintacapacitor:

  • credit card: Mastercard
  • wallet: Apple-pay
  • other

seller vintacapacitor:

  • # reviews: 6723
  • city: Buda, Texas
  • rating: 100.0%

shipping vintacapacitor:

  • carrier: USPS
  • class: Standard
  • transit: 5-13 Days
  • cost: $0.00
  • type: Fixed
  • service: USPS Ground Advantage

returns vintacapacitor:

  • method: Money back
  • paid by: Seller
  • policy: Returns Accepted
  • time: 30 Days

offer vintacapacitor:

  • quantity: 1
  • options: Ship-to-home
  • best offers: True
  • started: November 21, 2025
  • availability: In Stock
  • sold: 0

general vintacapacitor:

  • Vintage Audio Video > Vintage Parts Accessories > Vintage Capacitors
  • condition: Open box
part type: paper capacitor, unit type: unit, unit quantity: 63, country of origin: united states,
category: electronics > vintage audio video > vintage parts accessories > vintage capacitors, sku: 1431678650287792,

Sprague 118PS2 Is Similar To:

vintacapacitor logo
2 offers $54.99–$55.00 USD
  • Offer #1: $55.00 price + $0.00 shipping estimate = $55.00* total. With a unit quantity of 63, this rare find is perfect for restoring or repairing classic audio equipment, adding a touch of nostalgia to your vintage electronics collection. The Vintage Sprague Metallized Paper Capacitor is a sought-after component for vintage audio and electronics enthusiasts.FREE SHIPPING
  • Offer #2: $54.99 price + $0.00 shipping estimate = $54.99* total. With its high-quality construction and specific capacitance value, this capacitor is sure to enhance the performance and reliability of any vintage electronics application. The Sprague P107333 7917 3.0 200DC Capacitor is a vintage electronic component made by the renowned brand Sprague in the United States.FREE SHIPPING

Copyright © vintacapacitor.com